INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD

INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

INSTALL FRONT POWER SEAT SWITCH (w/ Seat Position Memory System)

REMOVE FRONT POWER SEAT SWITCH (w/o Seat Position Memory System)

INSTALL FRONT SEAT INNER CUSHION SHIELD

INSTALL FRONT SEAT CUSHION SHIELD WITH NO. 1 CUSHION SHIELD INNER

INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

INSTALL RECLINING POWER SEAT SWITCH KNOB

INSTALL FRONT SEAT INNER BELT ASSEMBLY

INSTALL FRONT SEAT ASSEMBLY

INSTALL REAR OUTER SEAT TRACK COVER

INSTALL REAR INNER SEAT TRACK COVER

INSTALL FRONT OUTER SEAT TRACK BRACKET COVER

INSTALL FRONT INNER SEAT TRACK BRACKET COVER

INSTALL FRONT SEAT HEADREST ASSEMBLY

PERFORM INITIALIZATION

INSPECT SRS WARNING LIGHT

INSPECT FRONT SEAT ASSEMBLY

Using hog ring pliers, install the separate type front seat cushion cover to the seat cushion pad with new hog rings.

• NOTICE:

Connect the hooks to install the separate type front seat cushion cover with pad.

Install the 2 clips.

Engage the clamp to install the occupant detection sensor connector.

Connect the connectors and clamps.

Connect the 2 connectors.

Install the switch with the 3 screws.

Connect the connector.

Install the switch with the 3 screws.

Attach the clip and 2 claws to install the cushion shield inner.

Install the screw.

Connect the connector to the lumbar front power seat switch.

Attach the claw and install the cushion shield with cushion shield inner.

Install the 5 screws.

Install the 2 rubber bands of the front seatback board to the seat frame.

Connect the connector to the No. 1 interior illumination light.

Install the front seat inner belt assembly with the nut.

• Torque:
• 42 N*m{ 428 kgf*cm, 31 ft.*lbf}

• NOTICE:

• Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.

Connect the connector and attach the 4 clamps.

Place the seat in the cabin.

Connect the connectors under the seat.

Connect the cable to the negative (-) battery terminal.

Operate the power seat switch knob and move the seat to the position farthest forward.

Tighten the 2 bolts on the rear seat track bracket.

• Torque:
• 37 N*m{ 377 kgf*cm, 27 ft.*lbf}

• HINT:

• Tighten the 2 bolts in the order indicated in the illustration.

Operate the power seat switch knob and move the seat to the rearmost position.

Tighten the 2 bolts on the rear seat track bracket.

• Torque:
• 37 N*m{ 377 kgf*cm, 27 ft.*lbf}