INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Manual Seat)

INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Power Seat)

INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)

INSTALL REAR INNER SEAT TRACK COVER (for Manual Seat)

INSTALL REAR OUTER SEAT TRACK COVER (for Manual Seat)

INSTALL FRONT INNER SEAT TRACK BRACKET COVER (for Manual Seat)

INSTALL FRONT OUTER SEAT TRACK BRACKET COVER (for Manual Seat)

INSTALL FRONT SEAT ASSEMBLY (for Power Seat)

INSTALL REAR INNER SEAT TRACK COVER (for Power Seat)

INSTALL REAR OUTER SEAT TRACK COVER (for Power Seat)

INSTALL FRONT INNER SEAT TRACK BRACKET COVER (for Power Seat)

INSTALL FRONT OUTER SEAT TRACK BRACKET COVER (for Power Seat)

INSTALL FRONT SEAT HEADREST ASSEMBLY

PERFORM INITIALIZATION

INSPECT SLIDE ADJUSTER LOCK (for Manual Seat)

INSPECT FRONT SEAT ASSEMBLY (for Power Seat)

INSPECT SRS WARNING LIGHT

Install the front seat inner belt assembly with the nut.

• Torque:
• 42 N*m{ 428 kgf*cm, 31 ft.*lbf}

• NOTICE:

• Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.

Connect the connector and attach the 3 clamps.

Install the front seat inner belt assembly with the nut.

• Torque:
• 42 N*m{ 428 kgf*cm, 31 ft.*lbf}

• NOTICE:

• Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.

Connect the connector and attach the 4 clamps.

Place the front seat assembly in the vehicle and align the adjuster pin with the hole on the vehicle side.

• NOTICE:

• When installing the passenger side front seat assembly, be careful not to step on the yaw rate sensor mounted on the floor under the seat.

Connect the connector.

Move the front seat assembly to the rearmost position by operating the slide handle.

• NOTICE:

• Check that the seat is locked.

Temporarily install the front seat track bracket with the 2 bolts.

Move the front seat assembly fully forward by operating the slide handle.

• NOTICE:

• Check that the seat is locked.

Temporarily install the rear seat track bracket with the 2 bolts.

Move the front seat assembly to the rearmost position by operating the slide handle.

• NOTICE:

• Check that the seat is locked.

Fully tighten the 2 bolts on the front seat track bracket in the order of the inner side bolt and then the outer side bolt.

• Torque:
• 37 N*m{ 377 kgf*cm, 27 ft.*lbf}

Move the front seat assembly fully forward by operating the slide handle.

• NOTICE:

• Check that the seat is locked.

Fully tighten the 2 bolts on the rear seat track bracket in the order of the inner side bolt and then the outer side bolt.

• Torque:
• 37 N*m{ 377 kgf*cm, 27 ft.*lbf}

Engage the 2 claws and install the rear inner seat track bracket cover.

Engage the 2 claws and install the rear outer seat track bracket cover.

Engage the 2 claws and install the front inner seat track bracket cover.

Engage the 2 claws and install the front outer seat track bracket cover.

Place the seat in the cabin.

Connect the connectors under the seat.

Connect the cable to the negative (-) battery terminal.

Operate the power seat switch knob and move the seat to the position farthest forward.

Tighten the 2 bolts on the rear seat track bracket.

• Torque:
• 37 N*m{ 377 kgf*cm, 27 ft.*lbf}

• HINT:

• Tighten the 2 bolts in the order indicated in the illustration.

Operate the power seat switch knob and move the seat to the rearmost position.

Tighten the 2 bolts on the rear seat track bracket.

• Torque:
• 37 N*m{ 377 kgf*cm, 27 ft.*lbf}