INSTALL FRONT PASSENGER AIRBAG ASSEMBLY

INSTALL SIDE DEFROSTER NOZZLE NO.2 DUCT

INSTALL HEATER TO REGISTER NO.3 DUCT

INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

CONNECT INSTRUMENT PANEL WIRE ASSEMBLY

INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

INSTALL FRONT PASSENGER AIRBAG ASSEMBLY

INSTALL NO.2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

INSTALL INSTRUMENT SIDE PANEL RH

INSTALL FRONT DOOR OPENING TRIM COVER RH

INSTALL FRONT DOOR SCUFF PLATE (w/ Illumination)

INSTALL FRONT DOOR SCUFF PLATE (w/o Illumination)

CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

PERFORM INITIALIZATION

INSPECT SRS WARNING LIGHT

Connect the 2 connectors and the 2 clamps to the front passenger airbag assembly.

• NOTICE:

• When handling the airbag connector, take care not to damage the airbag wire harness.

Engage the 5 hooks (A).

Engage the 5 hooks (B) and install the front passenger airbag assembly on the instrument panel.

Install the 2 screws.

Install the side No. 2 defroster nozzle duct with the screw <F-.

Install the No. 3 heater to register duct with the 3 screws <F-.

Connect the connector.

Connect the connectors.

Engage the 2 claws.

Install the glove compartment door assembly with the 5 screws.

Connect the connector.

• NOTICE:

• When handling the airbag connector, take care not to damage the airbag wire harness.

Install the front passenger side knee airbag assembly with the 3 bolts.

• Torque:
• 10 N*m{ 102 kgf*cm, 7 ft.*lbf}

Engage the 4 clips and install the No. 2 instrument panel under cover sub-assembly.

Engage the 5 claws and 3 clips, and then install the side instrument panel RH.

Engage the 6 claws and install the front door opening trim cover RH.

Perform initialization .

• HINT:

• Some systems need initialization after reconnecting the cable to the negative battery terminal.

Inspect the SRS warning light .