Lexus IS250 IS220d GSE20 ALE20 - AIR CONDITIONING
EVAPORATOR TEMPERATURE SENSOR - ON-VEHICLE INSPECTION
| 1. INSPECT EVAPORATOR TEMPERATURE SENSOR |
Measure the resistance according to the value(s) in the table below.
- Standard resistance:
Tester Connection Condition Specified Condition e1-5 - e1-6 -10°C (14°F) 7.30 to 9.10 kΩ e1-5 - e1-6 -5°C (23°F) 5.65 to 6.95 kΩ e1-5 - e1-6 0°C (32°F) 4.40 to 5.35 kΩ e1-5 - e1-6 5°C (41°F) 3.40 to 4.15 kΩ e1-5 - e1-6 10°C (50°F) 2.70 to 3.25 kΩ e1-5 - e1-6 15°C (59°F) 2.14 to 2.58 kΩ e1-5 - e1-6 20°C (68°F) 1.71 to 2.05 kΩ e1-5 - e1-6 25°C (77°F) 1.38 to 1.64 kΩ e1-5 - e1-6 30°C (86°F) 1.11 to 1.32 kΩ
- NOTICE:
Even slightly touching the sensor may change the resistance value. Be sure to hold the connector of the sensor.
When measuring, the sensor temperature must be the same as the ambient temperature.
- HINT:
- As the temperature increases, the resistance decreases (see the graph).
If the resistance is not as specified, replace the evaporator temperature sensor.
LEXUS IS250, IS220d / GSE20 ALE20