Dtc P1572 Improper Aiming Of Radar Sensor Beam Axis
DESCRIPTION
INSPECTION PROCEDURE
ADJUST MILLIMETER WAVE RADAR SENSOR
DTC P1572 Improper Aiming of Radar Sensor Beam Axis
DESCRIPTION
This DTC is output when the scanning angle of the millimeter wave radar sensor is incorrect. This DTC is also output when the millimeter wave radar sensor beam axis is determined to be in an incorrect position.
| DTC No. | DTC Detection Condition | Trouble Area |
| P1572 | The ECU detects that the millimeter wave radar sensor beam axis is in an incorrect position (0.15 sec. or more) while the dynamic radar cruise control is in operation | Millimeter wave radar sensor
|
INSPECTION PROCEDURE
- When the millimeter wave radar sensor is replaced with a new one, adjustment of the radar sensor beam axis must be performed .
| 1.ADJUST MILLIMETER WAVE RADAR SENSOR |
Refer to adjustment .
- It is necessary to make the ECM recognize specification information (whether the vehicle is equipped with the dynamic radar cruise control system or not). If this procedure has not been carried out, this DTCs may be output.
Clear the DTCs and then recheck for DTCs.
| | REPLACE MILLIMETER WAVE RADAR SENSOR |
|
|