Distance Control Ecu - Removal

Lexus IS250 IS220d GSE20 ALE20 - CRUISE CONTROL

DISTANCE CONTROL ECU - REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
  • CAUTION:
  • Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation .
2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Distance Control Ecu - Removal. CRUISE CONTROL. Lexus IS250 IS220d GSE20 ALE20

Remove the 2 screws <E-.

Push the 2 claws in the direction indicated by the arrow to disengage them.

Remove the No. 1 instrument panel under cover sub-assembly from the guide as shown in the illustration and pull the cover toward the rear of the vehicle.

Disconnect the connectors and remove the No. 1 instrument panel under cover sub-assembly.

3. REMOVE DISTANCE CONTROL ECU

Disconnect the connector.

Distance Control Ecu - Removal. CRUISE CONTROL. Lexus IS250 IS220d GSE20 ALE20

Remove the nut and the distance control ECU.