INSTALL CRUISE CONTROL MAIN SWITCH

INSTALL STEERING PAD

INSTALL NO. 3 LOWER STEERING WHEEL COVER

INSTALL NO. 2 LOWER STEERING WHEEL COVER

CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

PERFORM INITIALIZATION

INSPECT SRS WARNING LIGHT

Install the cruise control main switch with the 2 screws.

• Torque:
• 1.7 to 3.0 N*m{ 17 to 31 kgf*cm, 15 to 27 in.*lbf}

Connect the connector.

Support the steering pad with one hand as shown in the illustration.

Connect the 2 connectors to the steering pad.

• NOTICE:

• When handling the airbag connector, take care not to damage the airbag wire harness.

Connect the horn connector.

Confirm that the circumference groove of the "torx" screw fits in the screw case, and place the steering pad onto the steering wheel assembly.

Using a "torx" socket wrench (T30), tighten the 2 "torx" screws.

• Torque:
• 8.8 N*m{ 90 kgf*cm, 78 in.*lbf}