2AD-FHV CAN COMMUNICATION SYSTEM (for LHD) - PROBLEM SYMPTOMS TABLE
RESULT LIST OF HOW TO PROCEED WITH TROUBLESHOOTING| Symptom | Suspected area | See page |
| The result of "HOW TO PROCEED WITH TROUBLESHOOTING" is "Open in CAN Main Bus Line". |
Open in CAN Main Bus Line |
|
| The result of "HOW TO PROCEED WITH TROUBLESHOOTING" is "Short in CAN Bus Lines". |
Short in CAN Bus Lines |
|
| The result of "HOW TO PROCEED WITH TROUBLESHOOTING" is "Short to B+ in CAN Bus Line". |
Short to B+ in CAN Bus Line |
|
| The result of "HOW TO PROCEED WITH TROUBLESHOOTING" is "Short to GND in CAN Bus Line". |
Short to GND in CAN Bus Line |
|
| The result of "HOW TO PROCEED WITH TROUBLESHOOTING" is "Open in One Side of CAN Branch Line". |
Open in One Side of CAN Branch Line |
|
COMMUNICATION STOP MODE TABLE| Symptom | Suspected area | See page |
| "Engine" is not displayed on the intelligent tester. |
ECM Communication Stop Mode |
|
| "ABS/VSC/TRC" is not displayed on the intelligent tester. |
Skid Control ECU Communication Stop Mode |
|
| "Steering Angle Sensor" is not displayed on the intelligent tester. |
Steering Angle Sensor Communication Stop Mode |
|
| "Yaw Rate/Deceleration Sensor" is not displayed on the intelligent tester. |
Yaw Rate Sensor Communication Stop Mode |
|
| "SRS Airbag" is not displayed on the intelligent tester. |
Center Airbag Sensor Communication Stop Mode |
|
| "Body/Gateway" is not displayed on the intelligent tester. |
Gateway ECU Communication Stop Mode |
|
| "EPS" is not displayed on the intelligent tester. |
Power Steering ECU Communication Stop Mode |
|
| "Parking Assist Monitor" is not displayed on the intelligent tester. |
Television Camera ECU Communication Stop Mode |
|
LEXUS IS250, IS220d / GSE20 ALE20