Lexus IS250 IS220d GSE20 ALE20 - BRAKE CONTROL
TRACTION OFF SWITCH - REMOVAL
| 1. REMOVE FRONT DOOR SCUFF PLATE LH (for LHD) |
Put protective tape around the front door scuff plate.
Using a moulding remover, disengage the 4 clips.
Disengage the 7 claws and remove the front door scuff plate LH.
| 2. REMOVE FRONT DOOR SCUFF PLATE RH (for RHD) |
- HINT:
- Use the same procedures for the RH side and the LH side.
| 3. REMOVE INSTRUMENT SIDE PANEL LH (for LHD) |
Using a moulding remover, disengage the 5 claws and 3 clips, and then remove the side instrument panel LH.
| 4. REMOVE INSTRUMENT SIDE PANEL RH (for RHD) |
Using a moulding remover, disengage the 5 claws and 3 clips, and then remove the side instrument panel RH.
| 5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY |
Disengage the 7 clips.
Disconnect the connectors and remove the lower instrument panel finish panel sub-assembly.
| 6. REMOVE TRACTION OFF SWITCH |
Using a screwdriver, remove the traction off switch from the instrument panel finish panel sub-assembly.