INSPECT STOP LIGHT CONTROL RELAY

Remove the stop light control relay.

Measure the resistance according to the value(s) in the table below.

• Standard resistance:

• Tester Connection	Specified Condition
  1 - 2	Bellow 1 Ω
  3 - 4	Below 1 Ω (When battery voltage is not applied between terminals)
  3 - 5	10 kΩ or higher (When battery voltage is not applied between terminals)
  3 - 4	10 kΩ or higher (When battery voltage is applied between terminals 1 and 2)
  3 - 5	Below 1 Ω (When battery voltage is applied between terminals 1 and 2)

If the value is not as specified, replace the stop light control relay.