Lexus IS250 IS220d GSE20 ALE20 - PARKING BRAKE
PARKING BRAKE CABLE - REMOVAL
1. REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY (for Manual Transmission) |
- HINT:
- Refer to the procedures up to "REMOVE PARKING BRAKE LEVER" .
2. REMOVE PARKING BRAKE PEDAL ASSEMBLY (for Automatic Transmission) |
- HINT:
- Refer to the procedures up to "REMOVE PARKING BRAKE PEDAL" .
3. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY |

Pull up the parking brake claw.
Remove the lock nut and No. 1 wire adjusting nut of the No. 1 parking brake cable assembly from the parking brake.
Remove the clip and No. 1 parking brake cable assembly from the parking brake.
4. REMOVE NO. 2 DIFFERENTIAL SUPPORT PROTECTOR |

Remove the 2 nuts and the No. 2 differential support protector.
5. REMOVE NO. 1 DIFFERENTIAL SUPPORT PROTECTOR |
- HINT:
- Removal procedure of the No. 1 differential support protector is the same as that of the No. 2 differential support protector.
6. REMOVE REAR WHEEL |
7. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY |

Remove the 2 bolts and separate the rear disc brake caliper assembly.
- NOTICE:
- Hang the caliper with wire or equivalent.
Remove the No. 1 caliper plate (2 pieces).
8. REMOVE REAR DISC |
Release the parking brake.

Put matchmarks on the rear disc and rear axle hub.
Remove the rear disc.
- HINT:
- If the disc cannot be removed easily, turn the shoe adjuster until the wheel turns smoothly.
9. REMOVE NO. 2 PARKING BRAKE SHOE RETURN SPRING |

Using SST, remove the No. 2 parking brake shoe return spring.
- SST
- 09703-30011
10. REMOVE NO. 1 PARKING BRAKE SHOE RETURN SPRING |

Using SST, remove the No. 1 parking brake shoe return spring.
- SST
- 09703-30011
11. REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET |

Slide the parking brake shoe, and remove the parking brake shoe adjusting screw set.
12. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY |

Using SST, remove the No. 1 shoe hold down spring cup, No. 1 compression spring and No. 1 shoe hold down spring pin.
- SST
- 09718-00010
Remove the No. 1 parking brake shoe assembly.
- HINT:
- Use the service hole to retain the No. 1 hold down spring pin with your finger.
13. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY |

Using SST, remove the No. 1 shoe hold down spring cup, No. 1 compression spring and No. 1 shoe hold down spring pin.
- SST
- 09718-00010
Remove the No. 2 parking brake shoe assembly.
- HINT:
- Use the service hole to retain the No. 1 hold down spring pin with your finger.
14. REMOVE PARKING BRAKE SHOE LEVER |

Remove the parking brake shoe lever.
15. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY LH |
Remove the 3 bolts and disengage the 2 clamps and No. 2 parking brake cable assembly LH.
Separate the No. 2 parking brake cable assembly LH from the parking brake equalizer.

Remove the 2 nuts and No. 2 parking brake cable assembly.

Remove the 2 cable support brackets from the No. 2 parking brake cable assembly.