Lexus IS250 IS220d GSE20 ALE20 - BRAKE CONTROL
ABS MOTOR RELAY - ON-VEHICLE INSPECTION
| 1. INSPECT ABS MOTOR1 RELAY |
Remove the ABS MOTOR1 relay.
Measure the resistance according to the value(s) in the table below.
- Standard resistance:
Tester Connection Specified Condition 3 - 5 10 kΩ or higher
(When battery voltage is not applied between terminals)3 - 5 Below 1 Ω
(When battery voltage is applied between terminals)
If the value is not as specified, replace the ABS MOTOR1 relay.
| 2. INSPECT ABS MOTOR2 RELAY |
Remove the ABS MOTOR2 relay.
Measure the resistance according to the value(s) in the table below.
- Standard resistance:
Tester Connection Specified Condition 3 - 5 10 kΩ or higher
(When battery voltage is not applied between terminals)3 - 5 Below 1 Ω
(When battery voltage is applied between terminals)
If the value is not as specified, replace the ABS MOTOR2 relay.
LEXUS IS250, IS220d / GSE20 ALE20