INSPECT WINDSHIELD DEICER SWITCH

Disconnect the windshield deicer switch connector.

Measure the voltage and resistance according to the value(s) in the table below.

• Voltage:

• Tester Connection	Condition	Specified Condition
  1 (ILL+) - 2 (ILL-)	Headlight dimmer switch OFF → ON	Below 1 V → 10 to 14 V
  4 (D) - 3(E)	Engine switch on (IG)	10 to 14 V
  5 (IG) - 3(E)	Engine switch on (IG)	10 to 14 V

• Resistance:

• Tester Connection	Condition	Specified Condition
  2 (ILL-) - Body ground	Always	Below 1Ω
  3(E) - Body ground	Always	Below 1Ω

Reconnect the windshield deicer connector.

Measure the voltage and resistance according to the value(s) in the table below.

• Voltage:

• Tester Connection	Condition	Specified Condition
  4 (D) - 3(E)	Engine switch on (IG), windshield deicer switch OFF → ON	Below 1 V → 10 to 14 V (after 15 +- 3 minutes: Below 1 V)
  5 (IG) - 3(E)	Engine switch on (IG), windshield deicer switch ON	10 to 14 V → Below 1 V