Lexus IS250 IS220d GSE20 ALE20 - SLIDING ROOF
SLIDING ROOF HOUSING - REMOVAL
1. REMOVE ROOF HEADLINING ASSEMBLY |
2. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH |
Disconnect the connector.
- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
Remove the 2 clips.
Remove the 9 bolts and curtain shield airbag assembly.
3. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY RH |
4. REMOVE SLIDING ROOF SIDE GARNISH LH |

Disengage the 5 claws and remove the sliding roof side garnish LH.
5. REMOVE SLIDING ROOF SIDE GARNISH RH |
6. REMOVE SLIDING ROOF GLASS SUB-ASSEMBLY |

Using a T25 "torx" driver, remove the 4 screws and sliding roof glass sub-assembly.
7. REMOVE SLIDING ROOF HOUSING SUB-ASSEMBLY |
Disconnect the 4 sliding roof drain hoses.
Remove the 6 bolts, 8 nuts, and sliding roof housing sub-assembly.
8. REMOVE SLIDING ROOF WEATHERSTRIP |
Remove the sliding roof weatherstrip from the sliding roof housing sub-assembly.
LEXUS IS250, IS220d / GSE20 ALE20