REMOVE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY

REMOVE SUNSHADE TRIM SUB-ASSEMBLY

REMOVE SLIDING ROOF DRIVE CABLE SUB-ASSEMBLY

Disengage the claw and remove the sliding roof drive gear bracket.

Remove the 2 bolts and sliding roof drive gear sub-assembly.

Remove the 2 screws and sliding roof piece sub-assemblies LH and RH.

Slide and remove the sunshade trim sub-assembly.

Remove the 2 screws and sliding roof side stoppers.

Using a screwdriver, disengage the 2 claws. Then slide the sliding roof drip channel rearward to remove it.

• HINT:

• Tape the screwdriver tip before use.

Hold down the window deflector.

Using a screwdriver, slide the sliding roof drive cable sub-assembly in the direction indicated by the arrow in the illustration to remove it.