REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH

REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

REMOVE COURTESY LIGHT ASSEMBLY

REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY

REMOVE FRONT INNER DOOR GLASS WEATHERSTRIP

REMOVE SEAT MEMORY SWITCH

Using a screwdriver wrapped with protective tape, disengage the 3 claws, and remove the front door inside handle bezel plug.

Using a screwdriver wrapped with protective tape, disengage the 4 claws and the 2 clips.

Disconnect the connector and remove the power window regulator master switch assembly.

Disengage the claw and remove the courtesy light assembly.

Disconnect the connector.

Remove the 2 screws.

Using the clip remover, disengage the 9 clips.

Pull out the front door trim board in the direction indicated by the arrow.

Remove the reference bosses from the front door panel.

Raise the front door trim board to disengage the 4 claws and remove the front door trim board together with the front door inner glass weatherstrip.

Disconnect the cables and each connector from the back side of the inside handle and remove the front door trim board sub-assembly.

Remove the 2 front door trim board retainers (green) from the front door trim board.

Disengage the 4 clips as shown in the illustration and remove the front door inner glass weatherstrip from the front door trim board.

Disconnect the connector.

Remove the 2 screws and memory switch.