INSPECT SEAT MEMORY SWITCH LH

INSPECT SEAT MEMORY SWITCH RH

Measure the resistance according to the value(s) in the table below.

• Standard resistance:

• Tester Connection	Switch Condition	Specified Condition
  1 (MRY) - 5(E)	SET switch is pressed	Below 1 Ω
  2 (M1) - 5 (E)	M1 switch is pressed	Below 1 Ω
  3 (M2) - 5 (E)	M2 switch is pressed	Below 1 Ω
  4 (M3) - 5 (E)	M3 switch is pressed	Below 1 Ω
  1 (MRY) - 5 (E)	SET switch is not pressed	10 kΩor higher
  2(M1) - 5(E)	M1 switch is not pressed	10 kΩor higher
  3(M2) - 5(E)	M2 switch is not pressed	10 kΩor higher
  4(M3) - 5(E)	M3 switch is not pressed	10 kΩor higher

If the result is not as specified, replace the switch.

Measure the resistance according to the value(s) in the table below.

• Standard resistance:

• Tester Connection	Switch Condition	Specified Condition
  1 (MMRY) - 5 (E)	SET switch is pressed	Below 1 Ω
  2 (1) - 5 (E)	M1 switch is pressed	Below 1 Ω
  3 (2) - 5 (E)	M2 switch is pressed	Below 1 Ω
  4 (3) - 5 (E)	M3 switch is pressed	Below 1 Ω
  1 (MMRY) - 5 (E)	SET switch is not pressed	10 kΩor higher
  2 (1) - (E)	M1 switch is not pressed	10 kΩor higher
  3 (2) - 5 (E)	M2 switch is not pressed	10 kΩor higher
  4 (3) - 5 (E)	M3 switch is not pressed	10 kΩor higher

If the result is not as specified, replace the switch.