REAR CONSOLE BOX - INSTALLATION

1. INSTALL CONSOLE BOX

Engage the 2 claws and 2 clips.

Install the 2 bolts <C-.

Connect the connector.

Connect the connectors.

Engage the 2 clamps.

Install the 2 bolts <C-.

2. INSTALL CONSOLE BOX REGISTER ASSEMBLY

Engage the 2 claws and 4 clips, and then install the console box register assembly.

Install the rear ash receptacle assembly.

3. INSTALL FRONT ASH RECEPTACLE SUB-ASSEMBLY

Connect the connectors.

Insert the protruding parts of the front ash receptacle sub-assembly into the 2 guide holes as shown in the illustration.

Install the front ash receptacle sub-assembly with the 2 screws <F-.

4. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)

Engage the 6 clips.

Close the snap.

5. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)

Engage the 7 claws and 2 clips.

Close the snap.

6. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission)

Connect the connectors.

Engage the 8 clips and install the console panel sub-assembly.

7. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission)

Engage the claw and 2 clips, and then install the upper No. 2 console panel garnish.

8. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission)

Engage the claw and 2 clips, and then install the upper No. 1 console panel garnish.

9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission)

LEXUS IS250, IS220d / GSE20 ALE20

Rear Console Box - Installation