Lexus IS250 IS220d GSE20 ALE20 - EXTERIOR
REAR BUMPER - REASSEMBLY
| 1. INSTALL UPPER REAR BUMPER RETAINER RH |
| 2. INSTALL UPPER REAR BUMPER RETAINER LH |
| 3. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT RH |
| 4. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT LH |
| 5. INSTALL NO. 1 REAR BUMPER SIDE SUPPORT RH |
| 6. INSTALL NO. 1 REAR BUMPER SIDE SUPPORT LH |
| 7. INSTALL REAR BUMPER REINFORCEMENT SUB-ASSEMBLY |
Install the grommet to the rear bumper reinforcement sub-assembly.
Install the rear bumper reinforcement sub-assembly with the 8 bolts.
- Torque:
- 20 N*m{ 204 kgf*cm, 15 ft.*lbf}
| 8. INSTALL REAR BUMPER ENERGY ABSORBER |
| 9. INSTALL REAR BUMPER COVER |
| 10. INSTALL REAR BUMPER PROTECTOR LH |
Install a new rear bumper protector LH.
| 11. INSTALL REAR BUMPER PROTECTOR RH |
| 12. INSTALL REFLEX REFLECTOR ASSEMBLY RH |
| 13. INSTALL REFLEX REFLECTOR ASSEMBLY LH |
| 14. INSTALL REAR BUMPER PIECE RH |
| 15. INSTALL REAR BUMPER PIECE LH |
| 16. INSTALL NO. 3 LUGGAGE ROOM WIRE (w/ Clearance Sonar System) |
| 17. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER (w/ Clearance Sonar System) |
| 18. INSTALL NO. 2 ULTRASONIC SENSOR (w/ Clearance Sonar System) |
Install the No. 2 ultrasonic sensor to the rear bumper.
Install the sensor retainer as shown in the illustration.
Connect the sensor connector.
| 19. INSTALL NO. 1 ULTRASONIC SENSOR (w/ Clearance Sonar System) |
Install the No. 1 ultrasonic sensor to the rear bumper.
Install the sensor retainer as shown in the illustration.
Connect the sensor connector.
LEXUS IS250, IS220d / GSE20 ALE20