REAR BUMPER - DISASSEMBLY
| 1. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Clearance Sonar System)
|
Disconnect the sensor connector.
Remove the sensor retainer as shown in the illustration.
Remove the No. 1 ultrasonic sensor from the rear bumper.
| 2. REMOVE NO. 2 ULTRASONIC SENSOR (w/ Clearance Sonar System)
|
Disconnect the sensor connector.
Remove the sensor retainer as shown in the illustration.
Remove the No. 2 ultrasonic sensor from the rear bumper.
| 3. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (w/ Clearance Sonar System) |
| 4. REMOVE NO. 3 LUGGAGE ROOM WIRE (w/ Clearance Sonar System) |
| 5. REMOVE REAR BUMPER PIECE LH |
Disengage the 2 claws and remove the rear bumper piece LH.
| 6. REMOVE REAR BUMPER PIECE RH |
| 7. REMOVE REFLEX REFLECTOR ASSEMBLY LH |
Disengage the claw and remove the reflex reflector assembly LH.
| 8. REMOVE REFLEX REFLECTOR ASSEMBLY RH |
| 9. REMOVE REAR BUMPER PROTECTOR LH |
Remove the rear bumper protector LH.
| 10. REMOVE REAR BUMPER PROTECTOR RH |
| 11. REMOVE REAR BUMPER COVER |
| 12. REMOVE REAR BUMPER ENERGY ABSORBER |
Remove the rear bumper energy absorber.
| 13. REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY |
Disengage the 2 claws and remove the rear bumper reinforcement sub-assembly.
| 14. REMOVE NO. 1 REAR BUMPER SIDE SUPPORT LH |
Remove the 2 screws, clip and No. 1 rear bumper side support LH.
| 15. REMOVE NO. 1 REAR BUMPER SIDE SUPPORT RH |
| 16. REMOVE NO. 2 REAR BUMPER SIDE SUPPORT LH |
Remove the 2 screws and No. 2 rear bumper side support LH.
| 17. REMOVE NO. 2 REAR BUMPER SIDE SUPPORT RH |
| 18. REMOVE UPPER REAR BUMPER RETAINER LH |
Remove the 2 screws and upper rear bumper retainer LH.
| 19. REMOVE UPPER REAR BUMPER RETAINER RH |
LEXUS IS250, IS220d / GSE20 ALE20
