POWER WINDOW CONTROL SYSTEM - OPERATION CHECK

CHECK WINDOW LOCK SWITCH

Check that the front passenger side power window and rear power windows operation are disabled when the window lock switch of the power window master switch is pressed.

Standard:
Front passenger side power window and rear power windows operation are disabled.

Check that the front passenger side power window and rear power windows can be operated when the window lock switch is pressed again.

Standard:
Front passenger side power window and rear power windows can be operated.

CHECK MANUAL UP/DOWN FUNCTION

Check that the driver side power window operates as follows:

Standard:
Condition Master Switch Switch Operation Power Window
Engine switch on (IG) Driver side Pulled halfway up UP (Closed)
Pushed halfway down DOWN (Open)

Check that the power windows except the driver side power window operates as follows:

Standard:

Condition	Master Switch	Switch Operation	Power Window
Engine switch on (IG) Window lock switch OFF	Passenger side	Pulled halfway up	UP (Closed)
	Passenger side	Pushed halfway down	DOWN (Open)
	Rear LH	Pulled halfway up	UP (Closed)
	Rear LH	Pushed halfway down	DOWN (Open)
	Rear RH	Pulled halfway up	UP (Closed)
	Rear RH	Pushed halfway down	DOWN (Open)

CHECK AUTO UP/DOWN FUNCTION

Check that the driver side power window operates as follows:

Standard:
Condition Master Switch Switch Operation Power Window
Engine switch on (IG) Driver side Pulled full up UP (Closed)
Pushed full down DOWN (Open)

Check that the power windows except the driver side power window operate as follows:

Standard:

Condition	Master Switch	Switch Operation	Power Window
Engine switch on (IG) Window lock switch OFF	Passenger side	Pulled full up	UP (Closed)
	Passenger side	Pushed full down	DOWN (Open)
	Rear LH	Pulled full up	UP (Closed)
	Rear LH	Pushed full down	DOWN (Open)
	Rear RH	Pulled full up	UP (Closed)
	Rear RH	Pushed full down	DOWN (Open)

CHECK REMOTE MANUAL UP/DOWN FUNCTION

Check that the power windows except the driver side power window operate as follows:

Standard:

Condition	Master Switch	Switch Operation	Power Window
Engine switch on (IG) Window lock switch OFF	Passenger side	Pulled halfway up	UP (Closed)
	Passenger side	Pushed halfway down	DOWN (Open)
	Rear LH	Pulled halfway up	UP (Closed)
	Rear LH	Pushed halfway down	DOWN (Open)
	Rear RH	Pulled halfway up	UP (Closed)
	Rear RH	Pushed halfway down	DOWN (Open)

CHECK REMOTE AUTO UP/DOWN FUNCTION

Check that the power windows except the driver side power window operate as follows:

Standard:

Condition	Master Switch	Switch Operation	Power Window
Engine switch on (IG) Window lock switch OFF	Passenger side	Pulled full up	UP (Closed)
	Passenger side	Pushed full down	DOWN (Open)
	Rear LH	Pulled full up	UP (Closed)
	Rear LH	Pushed full down	DOWN (Open)
	Rear RH	Pulled full up	UP (Closed)
	Rear RH	Pushed full down	DOWN (Open)

CHECK JAM PROTECTION FUNCTION

HINT:

The jam protection function prevents any part of your body from getting caught by accident between the door frame and the door glass during power window operation.

NOTICE:

If the power window motor has been reset, raise and lower the door glass several times using MANUAL function before performing the check.

Check that the door glass goes down by approx. 50 mm (1.97 in.) right when something gets caught between the door frame and door glass during power window operation. However, when the opening between the door frame and the door glass is less than 200 mm (7.87 in.), the door glass continues to go down and does not stop until an opening of 200 mm (7.87 in.) is achieved. Operative conditions:

AUTO UP

AUTO UP function after the engine switch is turned off

MANUAL UP function after the engine switch is turned off

LEXUS IS250, IS220d / GSE20 ALE20

WINDSHIELD / WINDOWGLASS

Lexus IS250 IS220d GSE20 ALE20

POWER WINDOW CONTROL SYSTEM