Lexus IS250 IS220d GSE20 ALE20 - MIRROR

INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/ Memory)

INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/o Memory)

INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/ Memory)

INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/o Memory)

OUTER REAR VIEW MIRROR - INSPECTION

1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/ Memory)

Inspect outer mirror motor operation.

Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

Standard:

Measurement Condition	Specified Condition
Battery positive (+) → Terminal 1 (MV) Battery negative (-) → Terminal 10 (M+)	Turns upward (A)
Battery positive (+) → Terminal 10 (M+) Battery negative (-) → Terminal 1 (MV)	Turns downward (B)
Battery positive (+) → Terminal 9 (MH) Battery negative (-) → Terminal 10 (M+)	Turns left (C)
Battery positive (+) → Terminal 10 (M+) Battery negative (-) → Terminal 9 (MH)	Turns right (D)

Inspect the retract mirror operation.

Apply battery voltage and check operation of the mirror, as shown in the table below.

Standard:

Measurement Condition	Specified Condition
Battery positive (+) → Terminal 7 (MF) Battery negative (-) → Terminal 1 (MV)	Returns (Driving position)
Battery positive (+) → Terminal 1 (MV) Battery negative (-) → Terminal 7 (MF)	Retracts

Inspect outer mirror heater operation.

Apply battery voltage and check operation of the mirror face, as shown in the table below.

Standard:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 3 (HTR+)
Battery negative (-) → Terminal 9 (HTR-) Mirror surface temperature becomes higher

Inspect electrochromic outer mirror operation.

Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

Standard:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 7 (EC+)
Battery negative (-) → Terminal 15 (EC-) Mirror surface changes to dark

2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/o Memory)

Inspect outer mirror motor operation.

Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

Standard:

Measurement Condition	Specified Condition
Battery positive (+) → Terminal 5 (MV) Battery negative (-) → Terminal 6 (M+)	Turns upward (A)
Battery positive (+) → Terminal 6 (M+) Battery negative (-) → Terminal 5 (MV)	Turns downward (B)
Battery positive (+) → Terminal 11 (MH) Battery negative (-) → Terminal 6 (M+)	Turns left (C)
Battery positive (+) → Terminal 6 (M+) Battery negative (-) → Terminal 11 (MH)	Turns right (D)

Inspect the retract mirror operation.

Apply battery voltage and check operation of the mirror, as shown in the table below.

Standard:

Measurement Condition	Specified Condition
Battery positive (+) → Terminal 7 (MF) Battery negative (-) → Terminal 1 (MV)	Returns (Driving position)
Battery positive (+) → Terminal 1 (MV) Battery negative (-) → Terminal 7 (MF)	Retracts

Inspect outer mirror heater operation.

Apply battery voltage and check operation of the mirror face, as shown in the table below.

Standard:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 3 (HTR+)
Battery negative (-) → Terminal 9 (HTR-) Mirror surface temperature becomes higher

Inspect electrochromic outer mirror operation.

Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

Standard:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 4 (EC+)
Battery negative (-) → Terminal 10 (EC-) Mirror surface changes to dark

3. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/ Memory)

Inspect outer mirror motor operation.

Remove the outer rear view mirror assembly.

Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

Standard:

Measurement Condition	Specified Condition
Battery positive (+) → Terminal 1 (MV) Battery negative (-) → Terminal 10 (M+)	Turns upward (A)
Battery positive (+) → Terminal 10 (M+) Battery negative (-) → Terminal 1 (MV)	Turns downward (B)
Battery positive (+) → Terminal 9 (LMHR) Battery negative (-) → Terminal 10 (LM+R)	Turns left (C)
Battery positive (+) → Terminal 10 (M+) Battery negative (-) → Terminal 9 (MH)	Turns right (D)

Inspect the retract mirror operation.

Apply battery voltage and check operation of the mirror, as shown in the table below.

Standard:

Measurement Condition	Specified Condition
Battery positive (+) → Terminal 7 (MF) Battery negative (-) → Terminal 1 (MV)	Returns (Driving position)
Battery positive (+) → Terminal 1 (MV) Battery negative (-) → Terminal 7 (MF)	Retracts

Inspect outer mirror heater operation.

Apply battery voltage and check operation of the mirror face, as shown in the table below.

Standard:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 3 (HTR+)
Battery negative (-) → Terminal 9 (HTR-) Mirror surface temperature becomes higher

Inspect electrochromic outer mirror operation.

Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

Standard:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 7 (EC+)
Battery negative (-) → Terminal 15 (EC-) Mirror surface changes to dark

4. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/o Memory)

Inspect outer mirror motor operation.

Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

Standard:

Measurement Condition	Specified Condition
Battery positive (+) → Terminal 5 (MV) Battery negative (-) → Terminal 6 (M+)	Turns upward (A)
Battery positive (+) → Terminal 6 (M+) Battery negative (-) → Terminal 5 (MV)	Turns downward (B)
Battery positive (+) → Terminal 11 (MH) Battery negative (-) → Terminal 6 (M+)	Turns left (C)
Battery positive (+) → Terminal 6 (M+) Battery negative (-) → Terminal 11 (MH)	Turns right (D)

Inspect the retract mirror operation.

Apply battery voltage and check operation of the mirror, as shown in the table below.

Standard:

Measurement Condition	Specified Condition
Battery positive (+) → Terminal 7 (MF) Battery negative (-) → Terminal 1 (MV)	Returns (Driving position)
Battery positive (+) → Terminal 1 (MV) Battery negative (-) → Terminal 7 (MF)	Retracts

Inspect outer mirror heater operation.

Apply battery voltage and check operation of the mirror face, as shown in the table below.

Standard:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 3 (HTR+)
Battery negative (-) → Terminal 9 (HTR-) Mirror surface temperature becomes higher

Inspect electrochromic outer mirror operation.

Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

Standard:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 4 (EC+)
Battery negative (-) → Terminal 10 (EC-) Mirror surface changes to dark

LEXUS IS250, IS220d / GSE20 ALE20

MIRROR

Lexus IS250 IS220d GSE20 ALE20

OUTER REAR VIEW MIRROR