INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY

INSTALL FRONT SEPARATE TYPE SEATBACK ASSEMBLY (w/o Seatback Board)

INSTALL FRONT SEPARATE TYPE SEATBACK ASSEMBLY (w/ Seatback Board)

INSTALL FRONT SEAT HEADREST SUPPORT

INSTALL FRONT SEAT HEADREST SUPPORT

INSTALL FRONT SEAT BACK BOARD SUB-ASSEMBLY (w/ Seatback Board)

INSTALL FRONT INNER SEAT CUSHION SHIELD

INSTALL FRONT SEAT CUSHION SHIELD WITH INNER NO. 1 CUSHION SHIELD

INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

INSTALL RECLINING POWER SEAT SWITCH KNOB

INSTALL FRONT SEAT INNER BELT ASSEMBLY

INSTALL FRONT SEAT ASSEMBLY

INSTALL REAR INNER SEAT TRACK COVER

INSTALL REAR OUTER SEAT TRACK COVER

INSTALL FRONT INNER SEAT TRACK BRACKET COVER

INSTALL FRONT OUTER SEAT TRACK BRACKET COVER

INSTALL FRONT SEAT HEADREST ASSEMBLY

Install the lumbar support adjuster with the 2 screws.

Connect the connector.

Fully cover the airbag with the 2 seatback cover brackets and tighten the nut.

• Torque:
• 5.5 N*m{ 56 kgf*cm, 49 in.*lbf}

• CAUTION:

Using hog ring pliers, install the seatback cover (with pad) to the seat frame with new hog rings, and attach the hooks.

Install the seatback cover (with pad) to the seat frame. (w/o Seatback Board)

Fully cover the airbag with the 2 seatback cover brackets and tighten the nut.

• Torque:
• 5.5 N*m{ 56 kgf*cm, 49 in.*lbf}

• CAUTION:

Using hog ring pliers, install the seatback cover (with pad) to the seat frame with new hog rings.

Using hog ring pliers, install the seatback cover (with pad) to the seat frame with new hog rings, and attach the hooks.

Install the front seatback cover and attach the hooks.

Install the front seat inner belt assembly with the nut.

• Torque:
• 42 N*m{ 428 kgf*cm, 31 ft.*lbf}

• NOTICE:

• Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.

Connect the connector and attach the 4 clamps.

Place the seat in the cabin.

Connect the connectors under the seat.

Connect the cable to the negative (-) battery terminal.

Operate the power seat switch knob and move the seat to the position farthest forward.

Tighten the 2 bolts on the rear seat track bracket.

• Torque:
• 37 N*m{ 377 kgf*cm, 27 ft.*lbf}

• HINT:

• Tighten the 2 bolts in the order indicated in the illustration.

Operate the power seat switch knob and move the seat to the rearmost position.

Tighten the 2 bolts on the rear seat track bracket.

• Torque:
• 37 N*m{ 377 kgf*cm, 27 ft.*lbf}