Lexus IS250 IS220d GSE20 ALE20 - ENGINE HOOD / DOOR
LUGGAGE COMPARTMENT DOOR OPENER SYSTEM - TERMINALS OF ECU
CHECK MAIN BODY ECU RH |
Disconnect the RD and RK junction block connectors.
Disconnect the J75 ECU connector.
Measure the resistance and voltage according to the value(s) in the table below.
Symbols (Terminal No.) | Wiring Color | Terminal Description | Condition | Specified Condition |
BECU (RK-5 ) - Body ground | G-R - Body ground | Battery (power supply) | Always | 10 to 14 V |
GND1 (RD-17) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
GND2 (RD-7) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
If the result is not as specified, there may be a malfunction on the wire harness side.
Reconnect the RD and RK junction block connectors.
Reconnect the J75 ECU connector.
Measure the voltage according to the value(s) in the table below.
Symbols (Terminal No.) | Wiring Color | Terminal Description | Condition | Specified Condition |
TSW (J75-2) - Body ground | LG - Body ground | Luggage compartment door main opener switch signal input | Luggage compartment door main opener switch OFF | 10 to 14 V |
Luggage compartment door main opener switch ON | Below 1 V | |||
TKUL (J75-3) - Body ground | P - Body ground | Luggage compartment door opener switch signal input | Luggage compartment door opener switch OFF | 10 to 14 V |
Luggage compartment door opener switch ON | Below 1 V |
If the result is not as specified, the ECU may have a malfunction.
LEXUS IS250, IS220d / GSE20 ALE20