Lexus IS250 IS220d GSE20 ALE20 - EXTERIOR
LUGGAGE COMPARTMENT DOOR GARNISH - REMOVAL
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP |
Disengage the 3 claws and disconnect the cover.
Remove the 2 screws and luggage compartment door assist grip.
| 3. REMOVE LUGGAGE COMPARTMENT DOOR COVER |
Using a clip remover, remove the 12 clips and luggage compartment door cover.
| 4. REMOVE LUGGAGE COMPARTMENT DOOR REINFORCEMENT |
Using a clip remover, remove the clip.
Remove the 2 nuts and luggage compartment door reinforcement.
| 5. REMOVE LUGGAGE KEY ELECTRICAL SWITCH |
Disconnect the connector.
Remove the nut and luggage key electrical switch.
| 6. REMOVE TELEVISION CAMERA ASSEMBLY (w/ Parking Assist Monitor System) |
Disengage the camera connector clamp.
Disconnect the television camera connector.
Remove the 2 screws.
Disengage the 2 claws to remove the television camera assembly as shown in the illustration.
| 7. REMOVE REAR LIGHT ASSEMBLY LH |
Disconnect the connector.
Remove the 3 nuts and rear light assembly.
| 8. REMOVE REAR LIGHT ASSEMBLY RH |
| 9. REMOVE NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE |
Put protective tape around the No. 1 luggage compartment door name plate.
Insert a piano wire between the vehicle body and No. 1 luggage compartment door name plate.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the moulding to the vehicle body.
- NOTICE:
Remove the No. 1 luggage compartment door name plate.
| 10. REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR PLATE (for 4GR-FSE) |
Put protective tape around the No. 3 luggage compartment door plate.
Insert a piano wire between the vehicle body and No. 3 luggage compartment door plate.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the moulding to the vehicle body.
- NOTICE:
Remove the No. 3 luggage compartment door plate.
| 11. REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR PLATE (for 2AD-FHV) |
Put protective tape around the No. 3 luggage compartment door plate.
Insert a piano wire between the vehicle body and No. 3 luggage compartment door plate.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the moulding to the vehicle body.
- NOTICE:
Remove the No. 3 luggage compartment door plate.
| 12. REMOVE LUGGAGE COMPARTMENT OUTSIDE DOOR GARNISH SUB-ASSEMBLY |
Remove the 3 nuts.
Disengage the 5 clips and remove the luggage compartment outside door garnish sub-assembly.