Centering bolts are used to mount the door hinge to the vehicle body and door. The door cannot be adjusted with the centering bolts on. Substitute the centering bolts with standard bolts (with washers) when making adjustments.

A bolt without a torque specification is shown in the standard bolt chart .

1. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP

Disengage the 3 claws and disconnect the cover.

Remove the 2 screws and luggage compartment door assist grip.

2. REMOVE LUGGAGE COMPARTMENT DOOR COVER

Using a clip remover, remove the 12 clips and luggage compartment door cover.

3. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM COVER

4. REMOVE SPARE WHEEL COVER

5. REMOVE DECK SIDE TRIM BOX LH

6. REMOVE DECK SIDE TRIM BOX RH

7. REMOVE ROPE HOOK ASSEMBLY

Remove the 3 bolts and 3 rope hook assemblies.

8. REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER

Using a clip remover, remove the 3 clips.

Disengage the 4 clips and remove the rear luggage compartment trim cover.

9. ADJUST LUGGAGE COMPARTMENT DOOR

Horizontally and vertically adjust the door by loosening the door side hinge bolts.

Torque:
8.0 N*m{ 82 kgf*cm, 71 in.*lbf}

Adjust the striker position by slightly loosening the striker mounting screws and hitting the striker with a plastic hammer.

Tighten the striker mounting screws after the adjustment.

Torque:
5.5 N*m{ 56 kgf*cm, 49 in.*lbf}

10. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

11. INSTALL ROPE HOOK ASSEMBLY

12. INSTALL DECK SIDE TRIM BOX LH

13. INSTALL DECK SIDE TRIM BOX RH

14. INSTALL SPARE WHEEL COVER

15. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM COVER

16. INSTALL LUGGAGE COMPARTMENT DOOR COVER

17. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP

LEXUS IS250, IS220d / GSE20 ALE20

ENGINE HOOD / DOOR

Lexus IS250 IS220d GSE20 ALE20

LUGGAGE COMPARTMENT DOOR