INSTALL INSTRUMENT PANEL CUSHION (for 2AD-FHV)

INSTALL INSTRUMENT PANEL SPACER

INSTALL ENGINE SWITCH

INSTALL AUTOMATIC LIGHT CONTROL SENSOR

INSTALL DEFROSTER NOZZLE GARNISH

INSTALL FRONT PASSENGER AIRBAG ASSEMBLY

INSTALL NO. 2 INSTRUMENT PANEL WIRE (for LHD)

INSTALL NO. 2 INSTRUMENT PANEL WIRE (for RHD)

INSTALL NAVIGATION ANTENNA (w/ Navigation System)

INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY

INSTALL SIDE DEFROSTER NOZZLE

INSTALL NO. 2 HEATER TO REGISTER DUCT

INSTALL DEFROSTER NOZZLE ASSEMBLY

INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT

INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT

INSTALL NO. 3 HEATER TO REGISTER DUCT

INSTALL NO. 1 HEATER TO REGISTER DUCT

Install a new instrument panel cushion.

Install a new instrument panel spacer.

Engage the 2 claws and install the engine switch.

Engage the 2 claws and install the automatic light control sensor.

Engage the 8 claws and 2 clips, and install the defroster nozzle garnish.

Connect the 2 connectors and the 2 clamps to the front passenger airbag assembly.

• NOTICE:

• When handling the airbag connector, take care not to damage the airbag wire harness.

Engage the 5 hooks (A).

Engage the 5 hooks (B) and install the front passenger airbag assembly on the instrument panel.

Install the 2 screws.

Engage the 4 clamps.

Connect the connector and install the No. 2 instrument panel wire.

Engage the 5 clamps.

Connect the connector and install the No. 2 instrument panel wire.

Install the navigation antenna with the 2 screws.

Engage the 2 clamps.

Engage the clamp and install the No. 2 antenna cord sub-assembly.

Engage the 4 claws and install the side defroster nozzle.

Install the No. 2 heater to register duct with the 4 screws <F-.

Install the defroster nozzle assembly with the 3 screws <F-.

Install the side No. 2 defroster nozzle duct with the screw <F-.

Install the side No. 1 defroster nozzle duct with the screw <F-.

Install the No. 3 heater to register duct with the 3 screws <F-.

Install the No. 1 heater to register duct with the 3 screws <F-.