Lexus IS250 IS220d GSE20 ALE20 - SEAT
FRONT SEAT ASSEMBLY (for Power Seat) - REMOVAL
- HINT:
- Use the same procedures for the LH side and RH side.
| 1. REMOVE FRONT SEAT HEADREST ASSEMBLY |
| 2. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER |
Operate the power seat switch knob and move the seat to the rearmost position.
Using a screwdriver, detach the 2 claws and remove the seat track bracket cover outer front LH.
- HINT:
- Tape the screwdriver tip before use.
| 3. REMOVE FRONT INNER SEAT TRACK BRACKET COVER |
| 4. REMOVE REAR OUTER SEAT TRACK COVER |
Operate the power seat switch knob and move the seat to the position farthest forward.
Using a screwdriver, detach the 2 claws and remove the front seat track cover rear outer LH.
- HINT:
- Tape the screwdriver tip before use.
| 5. REMOVE REAR INNER SEAT TRACK COVER |
| 6. REMOVE FRONT SEAT ASSEMBLY |
Operate the power seat switch knob and move the seat to the rearmost position.
Remove the 2 bolts on the front seat track bracket.
Operate the power seat switch knob and move the seat to the position farthest forward.
Remove the 2 bolts on the rear seat track bracket.
Disconnect the cable from the negative (-) battery terminal.
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent the airbag and seat belt pretensioner from deploying .
Disconnect the connectors under the seat. Then remove the seat.