Lexus IS250 IS220d GSE20 ALE20 - SEAT
FRONT SEAT ASSEMBLY (for Power Seat) - INSTALLATION
- HINT:
- Use the same procedures for the LH side and RH side.
| 1. INSTALL FRONT SEAT ASSEMBLY |
Place the seat in the cabin.
Connect the connectors under the seat.
Connect the cable to the negative (-) battery terminal.
Operate the power seat switch knob and move the seat to the position farthest forward.
Tighten the 2 bolts on the rear seat track bracket.
- Torque:
- 37 N*m{ 377 kgf*cm, 27 ft.*lbf}
- HINT:
- Tighten the 2 bolts in the order indicated in the illustration.
Operate the power seat switch knob and move the seat to the rearmost position.
Tighten the 2 bolts on the rear seat track bracket.
- Torque:
- 37 N*m{ 377 kgf*cm, 27 ft.*lbf}
| 2. INSTALL REAR INNER SEAT TRACK COVER LH |
| 3. INSTALL REAR OUTER SEAT TRACK COVER LH |
| 4. INSTALL FRONT OUTER SEAT TRACK BRACKET COVER LH |
| 5. INSTALL FRONT OUTER SEAT TRACK BRACKET COVER LH |
| 6. INSTALL FRONT SEAT HEADREST ASSEMBLY |
| 7. PERFORM INITIALIZATION |
Perform initialization.
- NOTICE:
- Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
| 8. CHECK SRS WARNING LIGHT |
Check the SRS warning light.
| 9. INSPECT FRONT SEAT ASSEMBLY |
Check the power seat operation.
Check the seat heater operation (with seat heater system).
Turn the engine switch on (IG).
Turn the seat heater switch ON.
Wait 5 minutes or more and confirm that the seat surface becomes warm.
LEXUS IS250, IS220d / GSE20 ALE20