Lexus IS250 IS220d GSE20 ALE20 - SEAT
FRONT SEAT ASSEMBLY (for Power Seat) - DISASSEMBLY
- CAUTION:
- Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.
- HINT:
- Use the same procedures for the LH side and RH side.
| 1. REMOVE FRONT SEAT INNER BELT ASSEMBLY |
Disconnect the connector and detach the 4 clamps.
Remove the nut and front seat inner belt assembly.
| 2. REMOVE RECLINING POWER SEAT SWITCH KNOB |
Using a screwdriver, detach the knob.
- HINT:
- Tape the screwdriver tip before use.
| 3. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB |
Using a screwdriver, detach the knob.
- HINT:
- Tape the screwdriver tip before use.
| 4. REMOVE FRONT SEAT CUSHION SHIELD WITH INNER NO. 1 CUSHION SHIELD |
Release the 2 rubber bands of the front seatback board from the front seat frame.
Remove the 6 screws.
Disengage the claw and separate the front seat cushion shield assembly.
Disconnect the connector from the front power seat lumbar switch.
| 5. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD |
Remove the 2 screws.
Detach the claw and disconnect the cushion shield inner from the cushion shield.
| 6. REMOVE FRONT POWER SEAT LUMBAR SWITCH |
Remove the 2 screws and switch.
| 7. REMOVE LOWER OUTER SEAT TRACK SPACER |
Remove the 2 screws and spacer.
| 8. REMOVE FRONT INNER SEAT CUSHION SHIELD |
Remove the screw.
Using a screwdriver, detach the claw.
- HINT:
- Tape the screwdriver tip before use.
Using a clip remover, detach the clip and remove the cushion shield.
| 9. REMOVE LOWER INNER SEAT TRACK SPACER |
Remove the 2 screws and spacer from the cushion shield inner.
| 10. REMOVE FRONT POWER SEAT SWITCH (w/ Seat Position Memory System) |
Remove the 3 screws.
Disconnect the 2 connectors and remove the front power seat switch.
| 11. REMOVE FRONT POWER SEAT SWITCH (w/o Seat Position Memory System) |
Remove the 3 screws.
Disconnect the connector and remove the front power seat switch.
| 12. REMOVE FRONT SEPARATE TYPE SEAT CUSHION ASSEMBLY LH |
Disconnect the connectors and detach the clamps.
Using a screwdriver, detach the hooks and remove the front seat cushion cover with pad.
| 13. REMOVE FRONT SEPARATE TYPE SEAT CUSHION COVER |
Remove the hog rings and seat cushion cover from the seat cushion pad.
| 14. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH (w/ Seat Heater System) |
Cut off the tack pins that fasten the seat heater, and then remove the front seat cushion heater assembly from the seat cushion cover.
| 15. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY (w/ Seatback Board) |
Open the lower part of the seatback board. Then remove the 2 screws.
Pull the seatback board in the direction indicated by the arrow in the illustration to detach the 2 claws. Then, remove the seatback board.
| 16. REMOVE FRONT SEAT HEADREST SUPPORT |
Detach the 2 claws and remove the headrest support.
| 17. REMOVE FRONT SEAT HEADREST SUPPORT |
| 18. REMOVE FRONT SEPARATE TYPE SEATBACK ASSEMBLY (w/o Seatback Board) |
Open the 2 zippers and seatback cover.
Remove the hog rings and hooks.
Remove the nut and 2 seatback cover brackets.
| 19. REMOVE FRONT SEPARATE TYPE SEATBACK ASSEMBLY (w/ Seatback Board) |
Remove the hog ring and hooks.
Remove the hog rings and hooks.
Remove the hog rings.
Remove the nut and 2 seatback cover brackets.
| 20. REMOVE FRONT SEPARATE TYPE SEATBACK COVER |
Remove the hog rings and seatback cover from the seatback pad.
| 21. REMOVE FRONT SEAT BACK HEATER ASSEMBLY LH (w/ Seat Heater System) |
Cut off the tack pins that fasten the seat heater, and then remove the front seatback heater assembly from the seat cushion cover.
| 22. REMOVE LOWER RECLINING ADJUSTER INSIDE COVER RH |
Disconnect the harness.
Remove the 2 screws and lower reclining adjuster inside cover RH.
| 23. REMOVE LOWER RECLINING ADJUSTER INSIDE COVER LH |
Disconnect the harness.
Remove the 2 screws lower reclining adjuster inside cover LH.
| 24. REMOVE UPPER RECLINING ADJUSTER INSIDE COVER RH |
Remove the screw.
Detach the claw and remove the reclining adjuster inside upper cover RH.
| 25. REMOVE UPPER RECLINING ADJUSTER INSIDE COVER LH |
Remove the screw.
Detach the claw and remove the reclining adjuster inside upper cover LH.
| 26. REMOVE FRONT LOWER SEAT CUSHION SHIELD LH |
Remove the screw and detach the hook of the front seat lower cushion shield LH.
| 27. REMOVE FRONT LOWER SEAT CUSHION SHIELD |
Remove the screw and detach the hook of the front seat lower cushion shield.
| 28. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY |
Disconnect the connector and clamps.
Remove the 2 screws and lumbar support adjuster.
| 29. REMOVE SEATBACK CLIMATE CONTROL BLOWER (w/ Climate Control Seat System) |
Disconnect the connector and detach the 3 clamps.
Using a T30 ''torx'' socket, remove the 6 ''torx'' bolts and remove the seatback climate control cover and blower.
| 30. REMOVE SEAT CUSHION CLIMATE CONTROL DUCT (w/ Climate Control Seat System) |
Separate the 2 clamps (A) in the direction indicated by the arrow (1).
Separate the 2 clamps (B) in the direction indicated by the arrow (2).
Disengage the 2 claws, and remove the seat cushion climate control duct LH.
| 31. REMOVE SEAT CLIMATE CONTROL BLOWER (w/ Climate Control Seat System) |
Disconnect the connector.
Remove the screw, detach the claw and remove the blower with bracket.
Remove the 3 bolts, 3 bushes and blower from the bracket.
| 32. REMOVE SEAT POSITION SENSOR (for Driver Side) |
Disconnect the connector.
Detach the claw and remove the seat slide position sensor protector.
Using a T30 "torx" socket, remove the "torx" bolt and seat position sensor.
| 33. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System) |
Disconnect the 2 connectors.
Disconnect the clamp, claw and remove the seat heater control sub-assembly.
| 34. REMOVE FRONT SEAT WIRE |