Lexus IS250 IS220d GSE20 ALE20 - SEAT
FRONT SEAT ASSEMBLY (for Manual Seat) - DISASSEMBLY
| 1. REMOVE VERTICAL SEAT ADJUSTER KNOB (for Driver Seat) |
Remove the snap ring and the vertical seat adjuster knob.
| 2. REMOVE VERTICAL SEAT ADJUSTER KNOB CAP (for Driver Seat) |
Using a screwdriver, disengage the 3 claws and remove the vertical seat adjuster knob cap.
- HINT:
- Tape the screwdriver tip before use.
| 3. REMOVE VERTICAL ADJUSTING HANDLE (for Driver Seat) |
Remove the 2 screws and vertical adjusting handle.
| 4. REMOVE RECLINING ADJUSTER RELEASE HANDLE |
Lift the reclining adjuster release handle.
Using a screwdriver, disengage the claw and remove the reclining adjuster release handle.
- HINT:
- Tape the screwdriver tip before use.
| 5. REMOVE FRONT SEAT CUSHION SHIELD (for Driver Seat) |
Remove the screw.
Disengage the claw and clamp and remove the seat cushion shield.
| 6. REMOVE FRONT INNER SEAT BELT ASSEMBLY |
Disconnect the connector and detach the 3 clamps.
Remove the nut and front seat inner belt assembly.
| 7. REMOVE FRONT INNER SEAT CUSHION SHIELD |
Remove the screw.
Disengage the 2 claws and clip then remove the front inner seat cushion shield.
| 8. REMOVE FRONT SEAT CUSHION COVER WITH PAD |
Passenger seat only:
Separate the belt warning occupant detection sensor.
Disengage the 2 hooks.
Disengage the hooks and remove the front seat cushion cover with pad.
| 9. REMOVE FRONT SEAT CUSHION COVER |
Remove the hog rings.
Remove the hog rings and front seat cushion cover.
| 10. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System) |
Cut off the tack pins that fasten the seat heater, and then remove the front seat cushion heater assembly from the seat cushion cover.
| 11. REMOVE FRONT SEAT HEADREST SUPPORT |
Open the 2 zippers and seatback cover.
Disengage the 2 claws and remove the front seat headrest support.
| 12. REMOVE FRONT SEAT HEADREST SUPPORT |
| 13. REMOVE FRONT SEATBACK COVER WITH PAD |
Remove the hog rings and disengage the hooks.
Remove the nut and separate the bracket.
Remove the front seatback cover with pad.
| 14. REMOVE FRONT SEPARATE TYPE SEAT BACK COVER |
Remove the hog rings and front separate type seat back cover.
| 15. REMOVE FRONT SEAT BACK HEATER ASSEMBLY (w/ Seat Heater System) |
Cut off the tack pins that fasten the seat heater, and then remove the front seat cushion heater assembly from the seat cushion cover.
| 16. REMOVE SEAT RECLINING ADJUSTER INSIDE COVER LH |
Remove the screw.
Disengage the claw and remove the seat reclining adjuster inside cover LH.
| 17. REMOVE SEAT RECLINING ADJUSTER INSIDE COVER RH |
- HINT:
- Use the same procedures for the RH side and LH side.
| 18. REMOVE RECLINING ADJUSTER INSIDE COVER LH |
Remove the screw and reclining adjuster inside cover LH.
| 19. REMOVE RECLINING ADJUSTER INSIDE COVER RH |
- HINT:
- Use the same procedures for the RH side and LH side.
| 20. REMOVE FRONT LOWER SEAT CUSHION SHIELD LH |
Using a screwdriver, disengage the claw and remove the front lower seat cushion shield LH.
| 21. REMOVE FRONT LOWER SEAT CUSHION SHIELD RH |
- HINT:
- Use the same procedures for the RH side and LH side.
| 22. REMOVE SEAT POSITION AIRBAG SENSOR (for Driver Seat) |
| 23. REMOVE VERTICAL ADJUSTER SPACER (for Driver Seat) |
Disengage the clip and remove the vertical adjuster spacer.
| 24. REMOVE SEAT POSITION SENSOR |
Disconnect the connector.
Detach the claw and remove the seat position sensor protector.
Using a T30 "torx" socket, remove the "torx" bolt and seat position sensor.