INSPECT FRONT POWER SEAT LUMBAR SWITCH LH

INSPECT FRONT POWER SEAT LUMBAR SWITCH RH

Measure the resistance between the terminals when the switch is operated

• Standard resistance:

• Tester Connection	Switch Condition	Specified Condition
  4 (E) - 3 (R)	HOLD	Below 1 Ω
  2 (B) - 5 (H)	HOLD	Below 1 Ω
  4 (E) - 3 (R)	OFF	Below 1 Ω
  5 (H) - 1 (E)	OFF	Below 1 Ω
  2 (B) - 3 (R)	RELEASE	Below 1 Ω
  5 (H) - 1 (E)	RELEASE	Below 1 Ω

If the result is not as specified, replace the switch.

Measure the resistance between the terminals when the switch is operated.

• Standard resistance:

• Tester Connection	Switch Condition	Specified Condition
  1 (GND) - 5 (R)	HOLD	Below 1 Ω
  2 (B) - 3 (H)	HOLD	Below 1 Ω
  1 (GND) - 5 (R)	OFF	Below 1 Ω
  3 (H) - 4 (E)	OFF	Below 1 Ω
  3 (B) - 5 (R)	RELEASE	Below 1 Ω
  3 (H) - 4 (E)	RELEASE	Below 1 Ω

If the result is not as specified, replace switch.