Lexus IS250 IS220d GSE20 ALE20 - EXTERIOR
FRONT DOOR WINDOW FRAME MOULDING - INSTALLATION
| 1. INSTALL FRONT DOOR UPPER WINDOW FRAME MOULDING |
Engage the front door upper window frame moulding to the door frame.
Using an air riveter or hand riveter with a nose piece, install the front door upper window frame moulding with 7 new rivets.
- HINT:
- If the rivet cannot be cut, pull it once and cut it.
- NOTICE:
| 2. INSTALL FRONT DOOR REAR WINDOW FRAME MOULDING |
- HINT:
- When installing the front door rear window frame moulding rear, heat the vehicle body and front door rear window frame moulding using a heat light.
| Item | Temperature |
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Moulding | 20 to 30°C (68 to 86°F) |
- NOTICE:
- Do not heat the vehicle body and front door window frame moulding rear excessively.
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Clean the front door rear window frame moulding. (If reusing the front door rear window frame moulding)
Using a heat light, heat the front door rear window frame moulding.
Remove the double-sided tape from the front door rear window frame moulding.
Wipe off any tape adhesive residue with cleaner.
Apply new double-sided tape to the front door rear window frame moulding.
Install the front door rear window frame moulding.
Using a heat light, heat the vehicle body and front door rear window frame moulding.
Remove the peeling paper from the face of the front door rear window frame moulding.
- HINT:
- After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the front door rear window frame moulding with the clip.
| 3. INSTALL FRONT DOOR WEATHERSTRIP |
Engage the 21 clips to install a new front door weatherstrip.
| 4. INSTALL DOOR FRAME GARNISH |
Install the door frame garnish with the 2 clips.
| 5. INSTALL FRONT DOOR TRIM COVER |
Engage the 6 clips to install the front door trim cover.
Install the screw.
| 6. INSTALL FRONT DOOR BELT MOULDING ASSEMBLY |
| 7. INSTALL FRONT DOOR FRAME COVER |
| 8. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP |
Engage the 4 claws and install the front door inner glass weatherstrip.
| 9. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY |
Connect the rear door lock remote control cable and rear door inside locking cable to the front inside handle.
Connect each connector.
Engage the front door trim board with the 4 clips of the front door inner glass weatherstrip.
Engage the 9 clips and install the front door trim board to the front door panel.
Install the 2 screws.
| 10. INSTALL COURTESY LIGHT ASSEMBLY |
Connect the connector.
Engage the claw and install the courtesy light assembly.
| 11. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY |
Connect each connector.
Engage the 4 claws and 2 clips, and install the power window regulator master switch assembly.
| 12. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG |
Engage the 3 claws and install the front door inside handle bezel plug.
| 13. POWER WINDOW CONTROL SYSTEM INITIALIZATION |