INSPECT SATELLITE SWITCH

Disconnect the connector from the satellite switch.

Measure the resistance between the terminals according to the value(s) in the table below.

• Standard resistance:

• Tester Connection	Condition	Specified Condition
  J16-2 (LSET) - J16-5 (E)	Integration switch LH is pressed	Below 1 Ω
  J16-2 (LSET) - J16-5 (E)	Integration switch LH is not pressed	10 kΩ or higher
  J16-3 (SET) - J16-5 (E)	Integration switch ON/OFF is pressed	Below 1 Ω
  J16-3 (SET) - J16-5 (E)	Integration switch ON/OFF is not pressed	10 kΩ or higher
  J16-4 (RSEL) - J16-5 (E)	Integration switch RH is pressed	Below 1 Ω
  J16-4 (RSEL) - J16-5 (E)	Integration switch RH is not pressed	10 kΩ or higher

• HINT:

• If the value is not as specified, replace the satellite switch.