INSPECT REAR ROOM LIGHT (PERSONAL LIGHT)

INSPECT REAR ROOM LIGHT (DOME LIGHT)

Disconnect the R8 connector from the rear room light.

Measure the resistance according to the value(s) in the table below.

• Standard resistance:

• Tester Connection	Condition	Specified Condition
  R8-3 (RGND) - Body ground	Always	Below 1 Ω

Measure the voltage according to the value(s) in the table below.

• Standard voltage:

• Tester Connection	Condition	Specified Condition
  R8-1 (RRMP) - Body ground	Always	10 to 14 V

If the result is not as specified, repair or replace the wire harness or connector.

Connect the (+) lead from the battery to terminal 1 and the (-) lead to terminal 3.

Check that the personal light comes on.

• OK:

• Condition	Specified Condition
  LH side personal light ON	LH side personal light comes ON
  LH side personal light OFF	LH side personal light does not come ON
  RH side personal light ON	RH side personal light comes ON
  RH side personal light OFF	RH side personal light does not come ON

If the result is not as specified, replace the rear room light assembly.

Disconnect the R8 connector from the rear room light.

Measure the voltage according to the value(s) in the table below.

• Standard resistance:

• Tester Connection	Condition	Specified Condition
  R8-1 (RRMP) - Body ground	Always	10 to 14 V

If the result is not as specified, repair or replace the wire harness or connector.

Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 4.

Check that the rear interior light comes on.

• OK:
• Comes on

If the result is not as specified, replace the rear room light assembly.

Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 5.

Check that the rear seat light comes on.

• OK:
• Comes on

If the result is not as specified, replace the rear room light assembly.