Lexus IS250 IS220d GSE20 ALE20 - WIPER AND WASHER
RAIN SENSOR - REMOVAL
| 1. REMOVE RAIN SENSOR |
Release the stopper by pulling it down.
Disconnect the connector and remove the rain sensor as shown in the illustration.
| 2. CLEAN WINDSHIELD GLASS |
- NOTICE:
The rain sensor tape can be reused, however, replace it with a new one if it has dirt on it or it is damaged.
Check that the rain sensor tape does not remain on the windshield glass. If it does, remove it before installing the rain sensor.
LEXUS IS250, IS220d / GSE20 ALE20