INSTALL RADIO RECEIVER ASSEMBLY (w/o Navigation System)

INSTALL NO. 2 RADIO BRACKET (w/o Navigation System)

INSTALL NO. 1 RADIO BRACKET (w/o Navigation System)

INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)

INSTALL RADIO RECEIVER ASSEMBLY (w/ Navigation System)

INSTALL NO. 2 RADIO BRACKET (w/ Navigation System)

INSTALL NO. 1 RADIO BRACKET (w/ Navigation System)

INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)

INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL

INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

INSTALL CONSOLE BOX

INSTALL CONSOLE BOX REGISTER ASSEMBLY

INSTALL FRONT ASH RECEPTACLE SUB-ASSEMBLY

INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)

INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)

INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission)

INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission)

INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission)

INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission)

ADJUST CLOCK

Install the radio receiver assembly as shown in the illustration.

Install the radio No. 2 bracket with the 6 bolts.

Install the radio No. 1 bracket with the 6 bolts.

Connect each connector.

Install the integration control panel w/ radio receiver assembly with the 4 bolts.

Install the radio receiver assembly as shown in the illustration.

Install the radio No. 2 bracket with the 7 bolts.

Install the radio No. 1 bracket with the 7 bolts.

Engage the connector clamp.

Connect each connector.

Install the the multi-display w/ radio receiver assembly with the 4 bolts.

Engage the 4 claws and install the center lower instrument cluster finish panel.

Connect the connectors.

Engage the 11 claws and install the No. 3 instrument panel register assembly.

Engage the 2 claws and 2 clips.

Install the 2 bolts <C-.

Install the 2 bolts <C-.

Connect the connector.

Connect the connectors.

Engage the 2 clamps.

Install the 2 bolts <C-.

Engage the 2 claws and 4 clips, and then install the console box register assembly.

Install the rear ash receptacle assembly.

Connect the connectors.

Insert the protruding parts of the front ash receptacle sub-assembly into the 2 guide holes as shown in the illustration.

Install the front ash receptacle sub-assembly with the 2 screws <F-.

Engage the 6 clips.

Close the snap.

Engage the 7 claws and 2 clips.

Close the snap.

Connect the connectors.

Engage the 8 clips and install the console panel sub-assembly.

Engage the claw and 2 clips, and then install the upper No. 2 console panel garnish.

Engage the claw and 2 clips, and then install the upper No. 1 console panel garnish.