Parking Assist Monitor System - Precaution

Lexus IS250 IS220d GSE20 ALE20 - PARK ASSIST / MONITORING


PARKING ASSIST MONITOR SYSTEM - PRECAUTION

  • NOTICE:
  • When disconnecting the negative (-) battery terminal, initialize the following system(s) after the terminal is reconnected.
System NameSee procedure
Parking Assist Monitor System
Power Window Control System
Sliding Roof System
1.POINTS TO NOTE WHEN SERVICING

The maximum steering angle setting must be carried out with the engine on. Apply the parking brake, depress the brake pedal, move the shift lever to the N position, and ensure that the vehicle is not running.

Pay attention to the following points when servicing:

When disconnecting the battery cable, "SYSTEM INITIALIZING" appears on the screen. In this case, correct the steering angle neutral point .

When replacing the television camera ECU, "SYSTEM NOT READY" appears on the screen. In this case, set the maximum steering angle and steering angle neutral point, and adjust the line display position. In addition, when the television camera assembly is replaced or its position changes, readjustment of the line display position is required .