INSPECTION PROCEDURE
CHECK CONDITION
CHECK MAP DISC
CHECK MAP DISC
CHECK MICROPHONE (NAVIGATION CHECK MODE)
NAVIGATION SYSTEM - Voice Recognition Difficulty
INSPECTION PROCEDURE
Check if the system's voice recognition level is low by using only one particular voice.
- OK:
- System's voice recognition level is low with any voice.
- If system's voice recognition level varies depending on voice and pronunciation, this is not a malfunction.
Check that the map disc is not deformed or cracked.
- OK:
- No deformations or cracks on map disc.
Check for dirt on the map disc surface.
- OK:
- No dirt is on map disc surface.
- Do not use a conventional record cleaner or anti-static preservative.
- If the disc is dirty, clean the disc by wiping the disc surface radially with a soft cloth.
4.CHECK MICROPHONE (NAVIGATION CHECK MODE) |
Enter the "MICROPHONE & VOICE RECOGNITION CHECK" mode .
When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
Push the recording switch and perform voice recording.
- Voice can be recorded up to 5 seconds.
Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.
- OK:
- All check results are normal.
| PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE |
|
|
LEXUS IS250, IS220d / GSE20 ALE20