INSPECTION PROCEDURE
CHECK CELLULAR PHONE
CHECK SETTINGS
CHECK SETTINGS
CHECK MICROPHONE (DISPLAY CHECK MODE)
NAVIGATION SYSTEM - The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted
INSPECTION PROCEDURE
Check if the other side can hear your voice properly.
- OK:
- Your voice can be heard correctly.
Check if the mute switch is set to ON.
- OK:
- Mute switch is not set to ON.
Enter the "Handsfree Voice Quality Set" mode .
Check if the Send Voice Level is set to "0".
- The Send Voice Level can be set to 11 different levels, -5 to +5, with a 3 dB difference.
Check if the Send Voice Level is set to the minimum or maximum level.
- When the Send Voice Level is set to the minimum or maximum level, the sound may be distorted.
- OK:
- The Send Voice Level is set to "0".
| SET SEND VOICE LEVEL TO "0" |
|
|
4.CHECK MICROPHONE (DISPLAY CHECK MODE) |
Enter the "MICROPHONE & VOICE RECOGNITION CHECK" mode .
When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
Push the recording switch and perform voice recording.
- Voice can be recorded up to 5 seconds.
Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.
- OK:
- All check results are normal.
| PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE |
|
|
LEXUS IS250, IS220d / GSE20 ALE20