Navigation System - Display Does Not Dim When Light Control Switch Is Turned On
INSPECTION PROCEDURE
CHECK IMAGE QUALITY SETTING
CHECK VEHICLE SIGNAL (DISPLAY CHECK MODE)
NAVIGATION SYSTEM - Display does not Dim when Light Control Switch is Turned ON
INSPECTION PROCEDURE
| 1.CHECK IMAGE QUALITY SETTING |
Enter the display adjustment screen by pressing the "DISP" switch.
Turn the light control switch to the TAIL position.
Check if "DAY MODE" on the display is ON.
| OK | |
| |
| TURN "DAY MODE" SETTING OFF |
|
| 2.CHECK VEHICLE SIGNAL (DISPLAY CHECK MODE) |
Enter the "Display Check" mode (Vehicle Signal Check) .
Check that the display changes between DIM and BRIGHT according to the light control switch operation.
- OK:
| Light Control Switch | Display |
| TAIL or HEAD | DIM |
| OFF | BRIGHT |
- The display is updated once per second. It is normal for the display to lag behind the actual switch operation.
| | PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE |
|
|
