LIGHT CONTROL RHEOSTAT - INSTALLATION

1. INSTALL LIGHT CONTROL RHEOSTAT

Engage the 2 claws and install the light control rheostat.

Install the finish panel No. 2 retainer with switch with the 3 screws.

2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

Connect the connectors.

Engage the 7 clips and install the lower instrument panel finish panel sub-assembly.

3. INSTALL SIDE INSTRUMENT PANEL LH

Engage the 5 claws and 3 clips, and then install the side instrument panel LH.

4. INSTALL FRONT DOOR OPENING TRIM COVER LH

Engage the 6 claws and install the front door opening trim cover LH.

5. INSTALL FRONT DOOR SCUFF PLATE LH (w/o Illumination)

Engage the 4 clips.

Engage the 7 claws, and install the front door scuff plate LH.

6. INSTALL FRONT DOOR SCUFF PLATE LH (w/ Illumination)

Connect the connector.

Engage the 4 clips.

Engage the 7 claws, and install the front door scuff plate LH.

LEXUS IS250, IS220d / GSE20 ALE20