INSPECT LICENSE PLATE LIGHT ASSEMBLY

Disconnect the connector from the license plate light.

Measure the voltage according to the value(s) in the table below.

• Standard voltage:
• LH Side:

• Tester Connection	Condition	Specified Condition
  Q47-1 (B) - Q47-2 (E)	Dimmer switch ON	10 to 14 V
  Q47-1 (B) - Q47-2 (E)	Dimmer switch OFF	Below 1 V

• RH Side:

• Tester Connection	Condition	Specified Condition
  Q44-1 (B) - Q44-2 (E)	Dimmer switch ON	10 to 14 V
  Q44-1 (B) - Q44-2 (E)	Dimmer switch OFF	Below 1 V

If the result is not as specified, repair or replace the wire harness or connector.