REMOVE HEIGHT CONTROL SENSOR SUB-ASSEMBLY FRONT

INSPECT HEIGHT CONTROL SENSOR SUB-ASSEMBLY REAR

Connect 3 dry cell batteries (1.5 V) in series.

Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead from the battery to terminal 3.

Measure the voltage between terminals 2 and 1 while slowly moving the link up and down.

• Standard voltage:

• Tester Connection	Condition	Specified Condition
  A17-2 (SHFL) - A17-1 (SHG)	+45°	Approx. 4.5 V
  A17-2 (SHFL) - A17-1 (SHG)	0°(normal)	Approx 2.5 V
  A17-2 (SHFL) - A17-1 (SHG)	-45°	Approx 0.5 V

If the result is not as specified, replace the sensor.

Remove the height control sensor.

Connect 3 dry cell batteries (1.5 V) in series.

Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead from the battery to terminal 3.

Measure the voltage between terminals 2 and 1 while slowly moving the link up and down.

• Standard voltage:

• Tester Connection	Condition	Specified Condition
  Y2-2 (SHRL) - Y2-1 (SHG)	+45°	Approx. 4.5 V
  Y2-2 (SHRL) - Y2-1 (SHG)	0°(normal)	Approx 2.5 V
  Y2-2 (SHRL) - Y2-1 (SHG)	-45°	Approx 0.5 V

If the result is not as specified, replace the sensor.