INSPECT INTEGRATION CONTROL PANEL (Without Navigation System)

INSPECT CLOCK ASSEMBLY (With Navigation System)

Measure the resistance according to the value(s) in the table below.

• Standard resistance:

• Tester Connection	Switch Condition	Specified Condition
  J54-12 (F) - J54-8 (E)	Hazard warning switch OFF	10 kΩ or higher
  J54-12 (F) - J54-8 (E)	Hazard warning switch ON	Below 1 Ω

If the result is not as specified, replace the integration control panel.

Measure the resistance according to the value(s) in the table below.

• Standard resistance:

• Tester Connection	Switch Condition	Specified Condition
  J53-12 (F) - J53-2 (E)	Hazard warning switch OFF	10 kΩ or higher
  J53-12 (F) - J53-2 (E)	Hazard warning switch ON	Below 1 Ω

If the result is not as specified, replace the clock assembly.