GLOVE BOX LIGHT - INSTALLATION

1. INSTALL GLOVE BOX LIGHT ASSEMBLY

Install the glove box light assembly.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

Connect the connectors.

Engage the 2 claws.

Install the glove compartment door assembly with the 5 screws.

3. INSTALL PASSENGER SIDE KNEE AIRBAG ASSEMBLY

Connect the connector.

When handling the airbag connector, take care not to damage the airbag wire harness.

Install the front passenger side knee airbag assembly with the 3 bolts.

4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Engage the 4 clips and install the No. 2 instrument panel under cover sub-assembly.

5. INSTALL SIDE INSTRUMENT PANEL RH

Engage the 5 claws and 3 clips, and then install the side instrument panel RH.

6. INSTALL FRONT DOOR OPENING TRIM COVER RH

Engage the 6 claws and install the front door opening trim cover RH.

7. INSTALL FRONT DOOR SCUFF PLATE RH (w/o Illumination)

8. INSTALL FRONT DOOR SCUFF PLATE RH (w/ Illumination)

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

10. PERFORM INITIALIZATION

Some systems need initialization after reconnecting the cable to the negative battery terminal .

11. INSPECT SRS WARNING LIGHT

LEXUS IS250, IS220d / GSE20 ALE20