INSPECT GLOVE BOX LIGHT

Remove the glove box light.

Measure the voltage according to the value(s) in the table below.

• Standard voltage:

• Tester Connection	Condition	Specified Condition
  J56-2 - J56-1	Glove box is opened	10 to 14 V
  J56-2 - J56-1	Glove box is closed	Below 1 V

If the result is not as specified, repair or replace the wire harness or connector.

Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 1.

Check that the glove box light comes on.

• OK:
• Comes on

If the result is not as specified, replace the glove box light.