INSPECT ENTRY LOCK AND UNLOCK SWITCH

Remove the outside handle.

Disconnect the connectors.

Measure the resistance according to the value(s) in the table below.

• Standard resistance:

• Tester Connection (Symbols)	Condition	Specified Condition
  e1-1 (TRG-) - e1-3 (TRG+)	Lock switch not pushed	10 kΩ or higher
  	Lock switch pushed	Below 1 Ω
  n1-1 (TRG-) - n1-3 (TRG+)	Lock switch not pushed	10 kΩ or higher
  	Lock switch pushed	Below 1 Ω