DESCRIPTION
INSPECTION PROCEDURE
CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)
CLEAR DTC
RECHECK DTC
DTC 58-10 Gyro Error
DTC 80-10 Gyro Error
DESCRIPTION
DTC No. | DTC Detection Condition | Trouble Area |
58-10 | Ground short, power supply short, or open circuit in the gyro signal | |
80-10 | Ground short, power supply short, or open circuit in the gyro signal |
INSPECTION PROCEDURE
- After the inspection is completed, clear the DTCs.
1.CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE) |
Enter the "Navigation Check" mode (Vehicle Sensors) .
Check the gyro voltage.
- Standard voltage:
- 0.1 to 4.5 V
Recheck for DTCs and check if the same trouble occurs again.
- If DTCs are detected frequently, replace the navigation ECU.
- OK:
- Malfunction disappears.
LEXUS IS250, IS220d / GSE20 ALE20