DESCRIPTION
INSPECTION PROCEDURE
CHECK FOR DTC OF OTHER COMPONENTS
IDENTIFY THE COMPONENT WHICH HAS STORED THIS CODE
CHECK COMPONENT WHICH HAS STORED THIS CODE
CLEAR DTC
RECHECK DTC
DTC 01-DC Transmission Error
DESCRIPTION
DTC No. | DTC Detection Condition | Trouble Area |
01-DC | Transmission to component shown by sub-code failed (Detecting this DTC does not always mean actual failure) | If the same sub-code is recorded in other components, check harness for power supply and communication system of all components shown by code |
The radio receiver is the master unit.
Be sure to clear and recheck DTCs after the inspection is completed to confirm that no DTCs are output.
INSPECTION PROCEDURE
- Be sure to read DESCRIPTION before performing the following procedures.
1.CHECK FOR DTC OF OTHER COMPONENTS |
Check if the component shown by the sub-code is displayed in the check result of the other components.
Check if "01-DC" is output for the other components.
If "01-DC" is output for any other components, check if the same physical address is displayed.
- Result:
Result | Proceed to |
"01-DC" is output and the same physical address is displayed | A |
"01-DC" is not output or the same physical address is not displayed | B |
- For the list of the components shown by sub-codes, refer to the table in step 2.
2.IDENTIFY THE COMPONENT WHICH HAS STORED THIS CODE |
Enter the diagnostic mode.
Press the preset switch "3" to change to "Detailed Information Mode".
Identify the component which has stored this code.
Component Table:Component | Physical address |
Gateway ECU | 1C6 |
Stereo component amplifier | 440 |
Integration control & panel assembly | 1D8 |
Radio receiver | 190 |
"440 (stereo component amplifier)" is the component which has stored this code in the example shown in the illustration.
For details of the DTC display, refer to "DTC CHECK/CLEAR" .
3.CHECK COMPONENT WHICH HAS STORED THIS CODE |
Select the component which has stored this code.
Component Table:Component | Proceed to |
Gateway ECU | Gateway ECU communication error |
Stereo component amplifier | Stereo component amplifier communication error |
Integration control & panel assembly | Integration control & panel assembly communication error |
Radio receiver | Radio receiver communication error |
Clear the DTCs .
- If "01-DC" is output for only one component, this may not indicate a malfunction.
Recheck for DTCs and check if the same trouble code occurs again.
- OK:
- Malfunction disappears.
LEXUS IS250, IS220d / GSE20 ALE20